Change log v1.1.4

• Supports python sqlite .
• Optimize sensor_test output mode.
• DuoS supports Arduino.

Known Issues

• Duo 256M and DuoS does not yet support pinpong library.
• Duo arduino firmware does not support camera at the moment.

The firmware introduction:

• Enable ssh
• Enable CDC-NCM
• Blink LED
• Root password: milkv

Login via CDC-NCM using ssh:

ssh root@192.168.42.1

If you want to disable LED blinking:

mv /mnt/system/blink.sh /mnt/system/blink.sh_backup && sync

then reboot the board.

Using the IO-Board for Duo or Duo256M

https://milkv.io/docs/duo/io-board/usb-ethernet-iob