- Add NanoVNA H v3.7 and NanoVNA H4 v4.4 support (use Mode = SWC5351 in expert settings)
- Add Auto Scale (Calculate reference and scale values depend from max and min trace values, aligning with 'beautiful' borders)
- Reset E-Delay settings on load snp file
- Change Logmag value format (not use suffixes)
- Fix |Z| calculation
- Delta F output on XTAL measures
- Change chann...
VNA
- Added Enhanced Response calibration (but not compensate Port 2 impedance, due to memory limits)
- Separate e-dealay to edelay S11 and edelay s21 Change console command 'edelay [s11|s21] value' edelay input apply to active trace channel Disable edelay settings for calibration
- Add Calibration standard LOAD R setting (allow add actual Load value)
- Use parabolic regression for ca...
- Add frequency step input (allow set one point step value)
- Add support TIFF screenshot format (packed by RLE compression, see Image Format setting in SD CARD menu)
- Add Top / Bottom input for scale / ref
- Add S21 smith R+L/C series and shunt marker format (Format S21->Smith->... submenu)
- Add VF calculation in Measure Cable, from known cable length (If Cable Length not zero then VF calcu...
Use custom hardware library (allow save lot of space):
- GPT (Timers)
- PAL (GPIO)
- DMA
- EXT
- I2C
- I2S
- ADC
- Rewrite ChibiOS USB and Serial streams and HAL code
- Fixed some SD card problems, more faster write (use block write mode)
- Move all hardware depend code to board dir
Functions:
- Fix delay in usart read command
- Fix error response on empty input
- Add run script fr...
- Add SD card file browser:
Allow see files on card
Allow load and see screenshots (load BMP)
Allow save and load calibration to/from card
Allow load SnP files and see data - Add more traces formats: S11 |Y| module S11 G conductance S11 B susceptance S11 Parallel R S11 P...